Series-500 Ozone Monitor - High Range - 0 - 10.0 ppm (EOZ)

Description

The Aeroqual Series 500 is the flagship of the Aeroqual portable monitoring lineup, and is sold here including one sensor head of your choice. It builds on the feature set of the Series 300, adding built-in Data-Logging. The included software makes it easy to download and handle the data you log. It also has relay and voltage outputs, letting it interface to your controls and external datalogger systems. See the drop-down list above for the full list of available sensor options, including numerous gases and ranges.
Sensor Head Information:
Ozone (O3) sensor head. Gas Sensitive Electrochemical (GSE) head will measure Ozone gas  from 0-10 ppm with a 0.01 ppm resolution.  This is the perfect head for measuring low levels of ozone up to 10 ppm, for testing or high ambient ozone level use.
This sensor uses an active sensor technology with an internal fan to pull air accross the GSE sensor at a specific flow rate for accurate gas detection.  This fan will pull a fresh gas stream accross the GSE sensor every 5 seconds for accurate Ozone detection in most every environment.
The EOZ utilized a Kalman filter to achieve a fast speed of response (4 second update) with good accuracy accross a wide range (0-10 ppm).  This makes the EOZ a great addition to the ozone gas sensor lines that offer the best accuracy, sensitivity, and stability at low concentrations.
BENEFITS
Fits comfortably in the hand
One monitor compatible with up to 30 different sensors
Data logged directly onto monitor base
Audible alarm functionality
Changing sensors takes seconds and can be done anywhere
Remote sensor capability
Long life lithium battery technology
Zero and span calibrate in the field
Free PC software (Windows 7, 8, XP compatible)
Connect direct to PC via USB
APPLICATIONS:
Source and leak detection
Process control
Health and safety monitoring
Indoor air quality
WHAT'S INCLUDED:
Montor Base
LCD Digital Display
Lithium battery and charger
Integrated datalogger
0-5 VDC output
Zero and span calibration adjustment
Low and high audible alarm
Monitor to USB cable for connection to PC
PC software for datalogging
Control and Interface Features:
The monitor can also operate in control mode. Upper and lower control limits can be easily set directly on the display. Using the 0-5V output the Series 500 can be used to switch on or off an externally connected device, such as an ozone generator, or system in the presence of a predetermined level of gas. By selecting the optional wall-mount bracket and plugging in mains power the Series 500 is effectively able to act as a fixed monitor as well as a handheld portable device.
Other features on the Series 500 include monitor ID and location ID. Monitor ID identifies the monitor uniquely and ensures that all data from it are tied to that monitor. Location ID can be used to tag measurements to a specific location which is helpful when sampling at a number of sites over the course of a day or week. High and low alarms can also be configured to  alert when ozone concentrations have reach a user defined set point.
Calibration:
For those wanting to
recalibrate on site the Series 500
allows adjustment of zero and span. Together with
the R42 Calibration Accessory
and an ozone generator this function allows the sensor head to be fully recalibrated without having to return it to the factory. Alternatively the sensor head can be returned to Aeroqual for a factory calibration which includes a renewed calibration certificate.
Every sensor head we send out comes with a calibration certificate.
Click here
to see a visual explanation of the contents of your calibration certificate.
Interchangeable Sensors
:
Sensor heads for the Series-500 are interchangealbe, allowing you to detect many gasses with one device.
Using the optional carry cases
you can keep your Series-500, optional accessories, and spare sensor heads all in one safe, portable case.
Each sensor head will fit each handheld device.  Simply pull the sensor out and put a different sensor in it's place.  The S-500 will recognize the sensor and display the proper range and gas on the screen.
Replacement (or additional) sensor heads are available for all of the gases listed above. You can find their details and pricing on our
Replacement Sensors
page!
Note: sensors for the optional enclosure,
R13
,
outoor enclosure
, or
environmental enclosure
are all calibrated specifically for an enclosure.  Please specify when ordering if you are using sensor in an enclosure.
Data Logging:
The Aeroqual Series-500 has the most user friendly and flexible data logging software of any gas detector we have tested.  Data is stored on board the Series 500 with a maximum 8,188 records available. To download the data a USB cable is supplied for connection to PC. Free PC software provided with the Series 500 takes the data and presents it in a chart or table view.
The Aeroqual software will allow for table, or graph view that can be printed or displayed on the screen.  Date can also be exported to Excel or CSV file.  A handy daily log view is also possible with this software showing the average gas level for each day.
Data logging intervals can be chosen from 1 minute, to any duration the user chooses.  At 5-minute intervals the Series-500 can store data for over 28 days.
Screen shot below shows the table and graph view available in the Aeroqual data logging software.  User can choose either table or graph mode, and can choose timeframe to capture data from.
Click image for larger view
Screen below shows the Daily View mode.  User can choose to show a summary of data showing each day's summary of min, max, and average captured data.
Click image for larger view
Screen below shows the monitor set-up that can be performed from the Aeroqual Software.  Using this softwate the monitor can be plugged into the PC and set-up without having to access the monitor.  This is useful for outdoor, or potentially remote monitoring stations.  Monitor logging intervals, alarm, and relay set-points can all be changed from your PC.
Click image for larger view
Environmental or Outdoor Enclosures
:
The Series-500 can be ordered for outdoor, or harsh duty uses with a variety of opttions.
Note: When using an enclosure the sensor is calibrated specifically for use inside that enclosure.  Portable capabilities of the device will be lost.  However additional heads calibrated for portable use are availalbe.  Keep this in mind when ordering.
The R-13 Remote Sensor apadter
will allow the gas sensor to be placed in a remote area while the base unit is in a safe, protected environment.  Perfect for applications where outdoor gas measurements are desired and indoor data logging and recording is possible.  The R-13 is capable of measuring gasses accurately in slighly windy and dusty environments.  Some proection from sun, and rain will be required with the R-13
The R-13 Adapter can be purchased as a separate accessory when you purchase the Series-500
The Environmental Enclosure
will allow the Series-500 to placed in similar environts as the R-13 sensor head adapter.  With the clear cover gas readings from the Series-500 will stil be possible, along with all control and safety alarms still used.  In wet, or dusty environments this enclosure is the perfect method to implement the features of the Series-500 into your facility.  This is great for food processing applications where ozone or other gasses are used in wet and wash-down environements.
The Environmental Enclsoure can be added to your order of the Series-500.  We will configure and install the Series-500 and sensor heads in this enclosure prior to shipping.
The Outdoor Sensor Enclosure
is a relatively new addition to the Aeroqual Product LIne.  The Outdoor Sensor Enclsosure is designed specifically for outdoor environmental gas measurement.  This box can be safely set in outdoor environments and log gas measurements from the Series-500.
The Outdoor Sensor Enclsoure can be added to your order of the Series-500.  We will configure and install the Series-500 and sensor heads in this enclosure prior to shipping.
Battery Replacement
:
The Series-500 ships with a rechargeable and replacement battery.
Extra batteries can be purchased
to keep as a spare with your Series-500.  This will allow long term field measurements.  See image below for battery location and replacement.
Downloads:
Series 500 Product Spec Sheet
Series 500 Quick Guide
Series 500 Product Manual
Links to more info:
Calibration information
Tech info and Specifications on each available Gas Sensor
Additional Information:
Case Study on the use of the Series-500 + ENV head for NO2 detection by the Univerisy of Birmingham.
White paper  - Evaluation and Calibration of Aeroqual series 500 portable gas sensors for accurate measurement of ambient ozone and nitrogen dioxide